The wireless multifunctional power relay is a component of the JABLOTRON 100+ system. Enrolled to the control panel, the relay copies selected PG outputs.
AC-160-C Mounting-box-fitted wireless multifunctional power relay
The relay can also be installed as an autonomous device responding to the activation of unidirectional wireless detectors of the JA-15x series. In this case, the relay triggers according to the mode selected for the particular detector (5 selectable modes: extended copy, impulse, change status, switch off and block). It provides a switching relay with galvanic safety separation for switching 230V/16A power loads. In the system it occupies one position.
|Rated supply voltage||100-230 V, 50-60 Hz|
|Internal power consumption at 230V AC (min / max)||0.2 W / 0.7 W|
|Operating frequency||868.1 MHz, Jablotron protocol|
|Contact load capacity – protection class II||Max. switched voltage 250 V AC|
Resistance load (cosφ=1) max. 16 A
Inductive, capacitive load (cosφ=0.4) max. 8 A
Halogen lighting max. 1000 W
Minimum switched DC power 0.5 W
|Diameter of connected conductors||max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2|
|Ingress protection class||IP20|
|Dimensions||49 x 49 x 26 mm|
|Operating temperature range||-10 °C to + 40 °C, RH 75% non-condensing|
|In conformity with||ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1|
|Operating conditions||ERC REC 70-03|
There are no reviews yet.