The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.
AC-160-DIN Wireless multifunctional relay for DIN-rail installation
It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes – the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail. It occupies one position in the system.
|Power supply||~ 230 V / 50 Hz, protective class II.|
|Internal power consumption||0.4 W / max. 1.5 W|
|Loading capacity of the power relay contacts:|
|(galvanically isolated from the control terminals)||protection class II:|
|Max. switched voltage||250 V AC / 24 V DC|
|Resistance load (cosφ=1)||max. 16 A|
|Inductive, capacitive loads (cosφ=0.4)||max. 8 A|
|Halogen lighting||max. 1000 W|
|Minimum switched DC power||0.5 W|
|Wire cross section||max. 2 x 1.5 mm2; max. 1 x 2.5 mm2|
|Dimensions||18 x 90 x 65 mm, 1 DIN module|
|Environment according to||II. indoor, general, in accordance with EN 50131-1|
|Operating temperature range||-10 to +40 °C|
|Ingress protection class||IP20, IP40 for the front panel (EN 60529)|
|In conformity with||ETSI EN 300 220-1, EN 60950-1, EN 60947-6-1, EN 50581.|
There are no reviews yet.