The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection certainty.
JA-120PW Bus PIR / MW motion detector
The detector guards the same way as a classic PIR motion detector.
When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm report to the control panel.
|Power||from the control panel bus 12 V (9 … 15 V)|
|Current consumption in standby mode||5 mA|
|Current consumption for cable choice||25 mA|
|Recommended installation height||2.5 m above the floor|
|Detection angle/PIR coverage||110 degrees/12 m (standard lens)|
|Detection angle/MW coverage||24 degrees/15 m (in open space)|
|Detection angle/MW coverage||90 degrees/15 m (see the model room)|
|MW Frequency||9.35 GHz|
|Dimensions||60 x 110 x 55 mm|
|Classification||Security grade 2 / Environmental class II|
|– according to||EN 50131-1, EN 50131-2-4|
|– environment||Indoor general|
|– operating temperature range||-10 to +40 °C|
|– average humidity||75 % RH, non-condensing|
|– certification body||Trezor Test s.r.o. (no. 3025)|
|Also complies with||ETSI EN 300 440-1, EN 60950-1, EN 50130-4, EN 55022|
|Can be operated according to||ERC REC 70-03|