The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90 °/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.
JA-152P Wireless PIR motion detector
Besides standard positioning in a corner of a room it can be installed on a wall surface using a JA-196PL-S bracket where the detector is partly recessed and elegantly blends with the wall. For special applications such as e.g. ceiling mounting or an inclined detection angle the JA-191PL articulated holder can be used.
- The detector has impulse activation.
- The detector can be used to control programmable PG outputs.
- The resistance to false alarms is adjustable at two levels
- The detector provides standard resistance to white light at the level prescribed by the standard (up to 6000 lux).
- The detector is addressable and it occupies one position in the system
- Technical specifications
|Compatible with||F-Link 2.0.0 and higher|
|Power||1 Lithium battery type CR123A (3 V/1500 mAh)|
Please note: Battery not included
|Typical battery lifetime||4 years (the longest in smartwatch mode, at 20°C)|
|Low battery voltage||< 2.4 V|
|Current consumption in standby mode||30 μA|
|Maximum current consumption||100 mA|
|Communication band||868.1 MHz, JABLOTRON protocol|
|Communication range||approx. 300 m (open area)|
|Recommended installation height||2.2 – 2.5 m above the floor|
|Detection angle/detection coverage||90°/12 m|
|Dimensions||62 x 110 x 40 mm|
|Weight (without battery)||90 g|
|Classification||Security grade 2/Environmental class II (according to EN 50131-1)|
|Operational environment||Indoor general|
|Operational temperature range||-10 °C to +40 °C|
|Average operational humidity||75 % RH, non-condensing|
|Certification body||Trezor Test s.r.o. (no. 3025)|
|Complies with||EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581|
|Can be operated according to ERC REC 70-30|